<

Coronado® Masonry Coatings

A collection of an exterior hardscape waterproofer, exterior silicone-based water-repellent and sealer, and interior production block filler.

Coronado® Block Filler

Coronado® Block Filler

Flat
(958-11)

Coronado® Block Filler is designed specifically for spray application to fill voids and create a smooth, uniform surface on interior masonry block. It is packaged at a sprayable viscosity and is formulated with raw materials selected to minimize tip clogging.
  • Creates a smooth, uniform surface
  • Formulated for minimal tip clogging
  • For application by airless spray
  • Can also be applied by brush
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Polyvinyl Acetate
  • Recommended Use: Interior, Exterior
  • MPI Rating: 4,4 X-Green™
  • VOC Range: < 50 g/L
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
Texcrete® WB Acrylic Masonry Waterproofer Sand Finish

Texcrete® WB Acrylic Masonry Waterproofer Sand Finish

Flat
(W3192)

High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces.
  • Breathable, high-build film
  • Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light
  • Allows moisture to pass through without blistering or loss of adhesion
  • Provides a mildew-resistant coating
  • View the sell sheet for more information
  • Available Colors: White, Deep Base, Accent Base
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Range: < 100 g/L
TECHNICAL DATA SHEETS
Texcrete® WB Acrylic Masonry Waterproofer Smooth Finish

Texcrete® WB Acrylic Masonry Waterproofer Smooth Finish

Flat
(W3194)

High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces.
  • Breathable, high-build film
  • Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light
  • Allows moisture to pass through without blistering or loss of adhesion
  • Provides a mildew-resistant coating
  • View the sell sheet for more information
  • Available Colors: White, Deep Base, Accent Base
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Range: < 100 g/L
TECHNICAL DATA SHEETS
Texcrete® WB Acrylic Masonry Waterproofer Medium Finish

Texcrete® WB Acrylic Masonry Waterproofer Medium Finish

Flat
(W3196)

High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces.
  • Breathable, high-build film
  • Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light
  • Allows moisture to pass through without blistering or loss of adhesion
  • Provides a mildew-resistant coating
  • View the sell sheet for more information
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating: 42
  • VOC Range: < 50 g/L
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
Texcrete® Silicone Water Repellent

Texcrete® Silicone Water Repellent


(194)

A clear, water-repellent sealer that produces a breathable barrier on masonry. This barrier prevents chlorine penetration and reduces cracking, dirt pickup, efflorescence, and damage from freezing/thawing cycles. Because it is clear, the sealer penetrates deep into substrates without changing their appearance.
  • Clear, invisible barrier
  • Protects vertical and horizontal surfaces
  • Alkali-resistant
  • Non-flammable
  • Available Colors: Clear
  • Sheen (or Gloss): N/A
  • Cleanup: Soap and Water
  • Resin Type: Silicone
  • Recommended Use: Exterior
  • MPI Rating: 117
  • VOC Range: < 50 g/L
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
Elastite® 10 Mil Acrylic Elastomeric Coating

Elastite® 10 Mil Acrylic Elastomeric Coating

Flat
(160)

Elastite® Acrylic Elastomeric Coating cures harder than traditional elastomeric coatings on the outermost surface, giving this product much better resistance to dirt accumulation compared to traditional elastomerics. The coating remains flexible beneath the surface, bridging cracks and moving with the building.
  • Flexible waterproofing membrane
  • 200% elongation rating (applicable lines: 160, 162)
  • 300% elongation rating (applicable lines: 166)
  • Protects against wind driven rain
  • Resists dirt pickup
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Range: < 50 g/L
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
Elastite® Acrylic Masonry Sealer

Elastite® Acrylic Masonry Sealer

Flat
(48)

Designed to penetrate deeply into the pores of masonry surfaces to stop dusting and to form a foundation to support the Elastite® Coating System. An excellent chalk binding sealer resistant to the effects of alkali up to a pH of 13.
  • Excellent chalk binding sealer
  • Alkali-resistant
  • Protects against wind driven rain
  • Resists dirt pickup
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Range: < 250 g/L
TECHNICAL DATA SHEETS
Elastite® 20 Mil Acrylic Elastomeric Coating

Elastite® 20 Mil Acrylic Elastomeric Coating

Flat
(162)

Elastite® Acrylic Elastomeric Coating cures harder than traditional elastomeric coatings on the outermost surface, giving this product much better resistance to dirt accumulation compared to traditional elastomerics. The coating remains flexible beneath the surface, bridging cracks and moving with the building.
  • Flexible waterproofing membrane
  • 200% elongation rating (applicable lines: 160, 162)
  • 300% elongation rating (applicable lines: 166)
  • Protects against wind driven rain
  • Resists dirt pickup
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Range: < 50 g/L
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
Elastite® SUPER-STRETCH 20 Mil Acrylic Elastomeric Coating

Elastite® SUPER-STRETCH 20 Mil Acrylic Elastomeric Coating

Flat
(166)

Elastite® Acrylic Elastomeric Coating cures harder than traditional elastomeric coatings on the outermost surface, giving this product much better resistance to dirt accumulation compared to traditional elastomerics. The coating remains flexible beneath the surface, bridging cracks and moving with the building.
  • Flexible waterproofing membrane
  • 200% elongation rating (applicable lines: 160, 162)
  • 300% elongation rating (applicable lines: 166)
  • Protects against wind driven rain
  • Resists dirt pickup
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating: 38
  • VOC Range: < 50 g/L
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS

More Tools

Dinner plates in variety of bright colors against yellow wall

Find Your Color

Our color finder gives you several inspirational starting points.

Dark blue paint rolled onto wall

Paint Calculator

Tell us the dimensions of the room, and we'll tell you how much paint to buy.

Step-by-Step Guides.

Step-by-Step Guides

Explore how to get your next DIY project done–and done right.